Details

Inspect, identify and repair with the super-compact FlipMate™.

It produces bright white light for everyday use or high CRI light with Streamlight’s Color-Rite Technology™ to identify color differences in paint or wires.

Fits comfortably in the palm of your hand, allowing you to illuminate hard-to-get-to spaces, like under the dash. Go hands-free with the flat, magnetic base and stowable hook.

Compact & extremely powerful, the Flipmate™ LED rechargeable area light offers four (4) lighting options. Cool white LEDs for area lighting and 90 CRI LEDs for color matching. All use the latest in power LED technology.

The rechargeable battery results in one of the lowest operating costs of any area light of this type. The blade of the Flipmate can rotate 270º on the body. Detents hold the blade in your desired position, and the light will stand on its base.

There is a handy folding hook to hang the light by for added versatility. The base also includes magnets that will hold the light on any convenient ferrous metal surface (in any orientation) to provide task-specific illumination.

CASE MATERIAL: Nylon and Aluminum construction with a replaceable Polycarbonate lens.
DIMENSIONS:
- Length folded: 4.58 in. (11.63 cm) Thickness folded: 1.30 in. (3.30 cm) Width: 2.56 in. (6.50 cm)
- Length with the light bar fully extended: 7.94 in. (20.17 cm)
WEIGHT: 8.7 oz (247 grams)
LENS: Unbreakable polycarbonate. Gasket sealed.
LIGHT SOURCE: LED technology, impervious to shock with a 50,000 hour lifetime.
LIGHT OUTPUT: Cool white LEDs for bright, white light
- High: 500 lumens; runs 2.5 hours
  Low: 250 lumens; runs 5.75 hours
- 90 CRI LEDs - Streamlight’s Color-Rite Technology™ - to better see the color spectrum:
  High: 400 lumens; runs 2.5 hours
  Low: 200 lumens; runs 6 hours
Easy access push-button switch: Depress the button momentarily to turn the light on. The cool white LEDs will come on in high mode. Press the button again and switch to low. The third press of the button will turn the light off.
- To change to the 90 CRI LEDs, turn the light on, then press and hold the button for two seconds until the light source changes. The function is the same, high, low and off. To go back to cool white, just follow the press and hold procedure.
- NOTE- If you wait more than two seconds since the last button press, the next press of the button will turn the light off.
BATTERY: Lithium Ion 3800 mAh cell.
CHARGING: Typical recharge time is approximately 4.5 hours with an AC wall charger (5V/1A USB input).
- Charge times will vary when using just the USB/micro USB cord, depending on the voltage the USB source provides.